VTO2111D-P-S2

IP Villa Door Station

· Megapixel image sensor.
· Supports IR illumination and night vision.
· Two-way audio and voice call through app.
· Can be managed through the management platform; support voice
call between App and the door station.
· Card unlock, unlock on the indoor monitor, and remote unlock
through the App.
· Supports IP65(Silicone sealant is needed. For details, see the quick
start guide).
· Supports 10000 cards.
· Supports standard PoE power supply.
· Controls two locks.

Main Processor Embedded Processor
Operating System Embedded Linux OS
Button Type Mechanical
Number of Buttons 1
Interoperability ONVIF; CGI
Network Protocol IPv4; RTSP; UDP; DNS; P2P; RTP; TCP; SIP
Basic
Camera 1/2.8″ 2 MP CMOS high definition, low illumination/DWDR/ color/IR
Field of View H: 107°; V: 60°; D: 122°
Noise Reduction 3D NR
Video Compression H.264; H.265
Video Resolution Main stream: 720p, WVGA, D1, CIF
Sub stream: 1080p, WVGA, D1, QVGA, CIF
Video Frame Rate PAL: 25 fps;
NTSC: 30 fps
Video Bit Rate 256 Kbps–8 Mbps
Light Compensation Auto IR
Day/Night Auto(ICR)/Color/B/W;Color/B/W
Audio Compression G.711a; G.711u; PCM
Audio Input 1
Audio Output Built-in speaker
Audio Mode Two-way audio
Audio Enhancement Echo suppression/digital noise reduction
Audio Bit Rate 16 KHz, 16 bit
Function
Communication Mode Full digital
Unlock Mode Card; app; indoor monitor
Card Type IC card
Leave Videos Yes (an SD card must be inserted in the VTH)
Web Configuration Yes
Performance
Card Reading Distance 0 cm–4.5 cm (0″–1.77″)
Issue Card Locally Yes
Casing Material PC + Acrylic
Capacity
Card Capacity 10000
Port
RS-485 1
Power Output 1 port, 12 V and 200 mA
Exit Button 1
Door Status Detection 1
Lock Control 1 port, normally closed by default
Network Port 1 × 10/100 Mbps network port (8-core white
ribbon cable)
Alarm
Tamper Alarm Yes
en_USEnglish
No products in the cart.